SYB type no heat regeneration adsorption drying device   
        

The working principle of

SYB without heat regenerative dryer is according to the principle of pressure swing adsorption to a kind of drying equipment, compressed air adsorption moisture in the compressed air, pressurized conditions make the compressed air when dry, part of decompression with dry compressed air purging adsorbent, born to rain adsorbent, two alternates, recycling and dry compressed air blasting is obtained. According to the different atmospheric pressure dew point of compressed air, choose different adsorbents, commonly used adsorbents are activated alumina, molecular sieve, etc.
        

Product features

◆ set up automatic charging and equalizing process steps to reduce the impact of airflow on adsorbent;

◆ flange type filling mouth and discharge mouth, easy to replace the desiccant;

◆ scientific flow rate design, the selection of high quality adsorbent, to ensure the stability of finished gas dewpoint;

◆ special gas distributor to ensure uniform distribution of airflow, make the compressed air and adsorbent full contact, to prevent adsorption "dead Angle" and "tunnel effect";

◆ adopt German Siemens PLC program controller, liquid crystal display, humanized design, light touch button, and can adjust the regeneration time according to the working condition;

◆ drying and regeneration status display;

◆ dry air at the outlet of the control air source cited from the adsorption tower, to avoid oil and water pollution control valve and air way, to prevent valve rust and air way jam;

◆ high quality control components to ensure long-term and reliable operation of the equipment;

◆ high quality pneumatic valve switch quick, efficient and durable.

Technical parameter list

Inlet temperature: ≤45℃

Working pressure: 0.6~ 1.0mpa (1.0~ 3.0mpa can be provided according to user requirements)

Pressure drop: ≤ 0.023mpa

Dew point of finished product at atmospheric pressure: -40℃(alumina), -60℃(molecular sieve)

Regeneration gas consumption: ≤12%

Working power supply: AC220V/50Hz