SYA micro - thermal regeneration adsorption drying device  
        
The working principle of        
SYA tepefaction regeneration drier by pressure swing adsorption heat regeneration principle of compressed air drying equipment, is to absorb the advantages of with and without heat regenerative heat regeneration and development of products, is a kind of energy-efficient drying machine, the regeneration gas in elevated temperature after heating machine for purging regeneration of adsorbent adsorption tower can save gas consumption of regeneration, regeneration effect is good, adsorption work longer hours.        
        

Product features

◆ set up automatic charging and equalizing process steps to reduce the impact of airflow on adsorbent;

◆ flange type filling mouth and discharge mouth, easy to replace the desiccant;

◆ scientific flow rate design, the selection of high quality adsorbent, to ensure the stability of finished gas dewpoint;

◆ special gas distributor to ensure uniform distribution of airflow, make the compressed air and adsorbent full contact, to prevent adsorption "dead Angle" and "tunnel effect";

◆ PLC program controller, LCD display, light touch button, and can be adjusted according to the working conditions of the regeneration time;

◆ drying and regeneration status display, automatic constant temperature control, energy saving;

◆ dry air at the outlet of the control air source cited from the adsorption tower, to avoid oil and water pollution control valve and air way, to prevent valve rust and air way jam;

◆ high quality heating and control components to ensure long-term and reliable operation of the equipment;

◆ high quality pneumatic valve switch quick, efficient and durable.

Technical parameters

Inlet temperature: ≤45℃

Pressure drop: ≤0.023NPa

Working pressure: 0.6~1.OMpa(1.0~3.0Mpa can be provided according to user requirements)

Regeneration gas consumption: ≤4~6%

Atmospheric pressure dew point of finished products: ≤-40℃(alumina), ≤-60℃(molecular sieve)